The heating season has just begun, bringing with it six months of closed windows. During this period, shelves fill up with air purifiers, and product listings often claim impressive treatment areas that don’t align with real-world usage.
Upon examining the manufacturer specifications for various air purifiers available in France, we unearthed something more troubling than an overly optimistic marketing claim: a unit conversion error that has been copied across retail listings, resulting in a device advertising a flow rate 70% lower than its actual performance. This discrepancy can be easily demonstrated through a couple of straightforward calculations using the manufacturer’s own published figures.
Before diving into the details, let’s outline the three crucial metrics that actually influence a purchase decision, as none of them are the ones predominantly highlighted on packaging. We should also reiterate that indoor air quality in heated, closed spaces is measurable, not just intuitive, something we previously discussed in detail.
The three deciding metrics
The CADR, or clean air delivery rate, indicates the volume of air effectively filtered per hour, expressed in cubic meters. This is the only performance measure that truly matters. It’s not a mandatory specification, which explains why some product listings do not include it at all.
The air changes per hour (ACH) reveal how many times the total room volume passes through the device each hour. This metric ultimately influences the practical outcome.
The advertised area is the number prominently displayed on the box. However, this metric is the least reliable of the three, and here’s why.
Stating a treatment area only makes sense when paired with an air change rate. Manufacturers typically indicate the area corresponding to two air changes per hour, which is the minimum for effective treatment. Yet, for allergy sufferers or homes with pets, these same manufacturers recommend four to five changes per hour in their technical documentation.
In simpler terms, the effective area of treatment is two and a half times smaller than the advertised one.
| Advertised area (2 changes/h) | Real area treated (4.8 changes/h) |
|---|---|
| 16 m² | 7 m² |
| 40 m² | 17 m² |
| 53 m² | 22 m² |
| 108 m² | 45 m² |
The guiding principle is simple: divide the advertised area by two and a half, and then compare it with the volume of the specific room where the device will be used -not the entire house or living area combined with the kitchen, but just the room.
The unit error repeated on French listings
Here’s the unexpected finding.
Several French product listings claim a CADR of 148 m³/h for a device whose manufacturer states, in their technical documentation, that it provides 4.8 air changes per hour in a 21 m² room.
These two claims are mathematically incompatible. A room of 21 m² with a height of 2.50 m has a volume of 52.5 m³. To achieve 4.8 changes per hour, 252 m³ of air must be moved, not 148.
The issue arises from a forgotten conversion. The figure of 148 comes from the U.S. standard, expressed in cubic feet per minute (CFM). When converted accurately, 148 CFM equals 251 m³/h, which aligns perfectly with the necessary air change rates and corresponds exactly to what an independent laboratory measured for this device: 239 m³/h.
The number displayed on the French listing is, therefore, correct but in the wrong unit. The device is actually 70% more efficient than what its own listing claims.
There are two practical implications. First, comparisons between products in store often compare CFM with cubic meters per hour, rendering such comparisons meaningless. Second, you can quickly verify it yourself in thirty seconds: if the advertised CADR, multiplied by an hour, does not meet the air changes claimed in the same listing, the figure is in CFM. Just multiply it by 1.7.
The overlooked cost: the filter
An air purifier is a consumable device. The purchase price tells you very little about its long-term cost.
An original filter typically needs replacing every six to eight months under normal use, which amounts to about once and a half per year. Depending on the model, filters cost between 30 to 50 €. The decisive difference does not lie here but in the availability of compatible filters from other brands.
| Model | Purchase Price | Annual Filters | Electricity | Total over 5 years |
|---|---|---|---|---|
| Entry-level at 170 m³/h, original filter | 70 € | 45 € | 18 € | 386 € |
| Mid-range at 240 m³/h, compatible filter | 160 € | 33 € | 18 € | 415 € |
| Mid-range at 240 m³/h, original filter | 160 € | 53 € | 18 € | 516 € |
| Pet model with proprietary filter | 190 € | 75 € | 18 € | 655 € |
Two observations emerge from this table, neither of which is expected.
The first: the cheapest model at purchase may not be the cheapest in the long run, yet it often remains less expensive overall. A 70 € device with annual filter costs of 45 € can end up being cheaper than a 190 € model. The second, more significant point: two devices priced 30 € apart can differ by 240 € over five years, purely because of filter costs.
This mechanism deserves mention as it is becoming more common. Some devices require a proprietary pre-filter geometry, often justified by an integrated automatic cleaning mechanism. This design prevents any third-party manufacturer from producing compatible filters. Consequently, you end up with a device whose filter keeps its premium price throughout its lifespan, whereas standard filter models typically have compatible options available at 15-30 € after two years.
Therefore, the key question before making a purchase shouldn’t be “How much does the filter cost?” but rather “Are there compatible filters available for this model?” A quick search using the filter reference can reveal this in a minute. This is precisely the type of hidden cost not accurately reflected by current regulatory disclosures, as previously noted regarding durability and repairability indices.
What ANSES actually states, and about what
It is often claimed that “ANSES warns against air purifiers.” While true, the nuance is frequently misreported, altering the purchase decision entirely.
The agency’s warning pertains to active technologies: ozonation, ionization, cold plasma, and photocatalysis. These processes do not capture pollutants but transform them through chemical reactions, potentially producing secondary compounds whose safety is unproven. The agency points out a lack of demonstrated benefits and possible risks.
Passive mechanical filtration -using a fan to push air through a particulate filter and possibly activated carbon -does not fall under this category. It does not transform anything; it retains particles through a physical mechanism that can be verified.
The purchasing rule that arises is clear, though seldom articulated in consumer materials: look for an appliance that simply filters and be wary of those with added active functions. A purifier claiming to have an “ion generator,” “plasma sterilization,” or “photocatalysis” offers features that France’s health agency views with skepticism, often at a premium price.
Lastly, a point of vocabulary that has circulated widely: the term “HEPA,” without a specified class, guarantees nothing. Useful classifications for home use range from H11 to H13. Packaging that states “HEPA technology” or “HEPA type” without a number indicates intent, rather than measurable performance.
What an air purifier will not do
Four limitations exist, two of which often go unmentioned.
It does not capture particles already on the ground. An air purifier catches suspended particles near its intake. Fur, dander, and dust already settled on surfaces get bypassed entirely. Its purpose is to intercept what becomes airborne, not to replace vacuuming -something we previously examined in our robot vacuum comparison.
Automatic mode does not effectively manage established odors. This limitation is less documented but worth noting. The sensor for volatile organic compounds detects smells well, but the algorithms in automatic mode are calibrated for fine particles: the fan speed often remains low, and activated carbon cannot process enough air to do its job. For existing odors, manual speed adjustment to maximum is necessary, a suggestion no device makes.
It does not replace ventilation. An air purifier cannot eliminate carbon dioxide, which is the main marker of a confined space. A closed room with two occupants and a running purifier will see CO₂ levels rise just like without the appliance.
It is not a medical device. What an air purifier can measureably accomplish is reduce the concentration of suspended particulates and allergens in the room it operates. The implications for an individual depend on medical advice, not product claims; none of the health-related claims circulating about these devices are validated.
Noise: an underestimated and poorly reported criterion
This is the primary reason people store their air purifiers away: they work but are unbearable in a bedroom.
Announced values are consistently optimistic, with documented discrepancies. For a model rated at 21-53 dB by the manufacturer, an independent laboratory measured 31 to 55 dB depending on the speed. This difference is not a lie; it stems from varied protocols -distance to the microphone, room background noise, and measurement weighting. It is, however, consistent, allowing for a practical rule: add around ten decibels to the lower announced value to estimate what you will actually hear in night mode.
The figure itself is not the right parameter. What disrupts sleep is irregularity, not just volume. A continuous hum at 32 dB can be ignored after a few nights; however, a device on automatic mode that fluctuates based on sensor readings can disturb sleep with every adjustment. In a bedroom, the best setting is a forced low speed, not automatic mode.
Two practical details reflect this need. The ability to completely turn off the screen is essential -many models keep a permanently lit display. Additionally, a device placed on a floating floor may transmit vibrations to the floor; a simple foam mat underneath costs a few euros but significantly enhances nighttime comfort more than ten dB reduction would.
We measured these discrepancies on two devices from the same brand during tests of the Levoit Core 300S and Levoit Vital Pet Pro, the latter being the one on which we identified the CADR unit error mentioned earlier.
Ventilate or filter: sensible choices during heating season
The two processes do not address the same pollutants, which allows for sensible decisions without unnecessary spending.
Ventilation is superior for CO₂ and humidity. Five to ten minutes of wide-open windows twice daily drastically reduces CO₂ levels in occupied rooms and removes moisture. No purifier does this. Surprisingly, wide-open ventilation for ten minutes costs very little in heating, as it renews the air without chilling walls, which hold a significant portion of a building’s thermal inertia. Conversely, leaving a window ajar for two hours cools the structure; this is a common mistake.
Filters excel at addressing particles, particularly when windows cannot be opened: near busy roads, during pollution spikes, pollen season, or in spaces lacking suitable ventilation.
The effective approach during winter is to: ventilate briefly but thoroughly twice a day, and filter continuously in between. If the budget allows for only one, ventilation is free.

What to choose based on your situation
| Situation | What’s important | Useful budget |
|---|---|---|
| Bedroom, sleeping, room size 12 to 15 m² | Actual noise level in night mode, consistent airflow | 70 to 120 € |
| Living room 20 to 25 m², household with pets | Minimum CADR of 240 m³/h, compatible filters available | 150 to 200 € |
| Large open living space over 40 m² | CADR of 400 m³/h, or two devices rather than one large | 200 to 260 € |
| Near a busy road, rarely operable windows | Continuous operation, filter cost over five years | Decide on the filter before the device |
| Temporary need: work, painting, smoke | Maximum flow rate, ample activated carbon | Rental or second-hand device |
A note on the last two entries. Two average devices distributed through a large area perform better than one powerful unit placed in a corner: air circulation matters just as much as flow rate, and a purifier whose air intake is too close to a piece of furniture loses efficiency without reporting it.
Frequently asked questions
What area does an air purifier really cover?
About two and a half times less than the advertised area. Manufacturers display the area corresponding to two air changes per hour, while they themselves recommend four to five changes for a pet household or someone with allergies. A device advertised for 53 m² effectively treats 22 m².
What is the CADR of an air purifier?
It represents the volume of air effectively filtered per hour, expressed in cubic meters. It is the only performance measure that counts and is not mandatory anywhere. Beware of the unit; some French listings use the U.S. value in cubic feet per minute, which must be multiplied by 1.7 for cubic meters per hour.
How much does an air purifier cost over five years?
From 386 to 655 € depending on the models, for devices whose purchase prices range from 70 to 190 €. The difference lies primarily in the filter: a model with a proprietary consumable without compatible options may cost 240 € more over five years compared to a standard filter model purchased at a higher price.
Does ANSES discourage the use of air purifiers?
The agency’s position focuses on active technologies like ozonation, ionization, plasma, and photocatalysis, which transform pollutants through chemical reactions and may produce secondary compounds. Passive mechanical filtration, which retains particles through a filter, does not fall within this scope.
Does an air purifier replace ventilation?
No. It does not remove carbon dioxide, the key indicator of a confined space, nor humidity. Five to ten minutes of wide-open windows twice daily remain necessary and cost little in heating, as it renews the air without cooling the walls.
Does the mention of HEPA guarantee filter quality?
Not without a specified class. Useful classes for home use range from H11 to H13. Packaging that states “HEPA technology” or “HEPA type” without a number indicates a marketing intent rather than measurable performance.
Key takeaways
Three reflexes can help avoid the most common purchasing mistakes in this market.
Divide the advertised area by two and a half, and compare it to the specific room -not to the entire home. Look for the filter reference and check for compatible options before considering the price of the device. Finally, avoid active functions that add cost for technology viewed with skepticism by France’s health agency.
There remains an honest caveat that also applies to our own pages. The discrepancy between indicated and measured flow rates cannot be resolved without lab testing, and the only independent measurements available for these devices come from abroad. A reader seeking specific quantitative certainty regarding a particular model won’t find it in a French product listing or in a comparison that simply replicates it.




