4.6/5 - (60 votes)

The cost of heating is a pressing concern for many households, especially as the winter months approach.

The first heating bill is due in a few weeks

In France, an electrically heated home typically consumes around 4,312 kWh during the heating season from October to March, costing approximately 836 € for one winter. In contrast, the same home, if air-conditioned throughout the summer, costs only 59 €. Depending on the configuration, this creates a staggering ratio of 10 to 75. The difference is not surprising; raising temperatures from 5 to 19 °C in January requires a change of 14 degrees, while cooling from 33 to 26 °C in August only needs a 7-degree change.

This is the area where households have the most to gain, yet it is also rife with misconceptions. One major misconception revolves around the cost per kilowatt-hour: this is the number everyone focuses on, and it is often misleading.

In short, the real cost is calculated in euros per kilowatt-hour useful, factoring in the efficiency of the equipment. This suggests that a heat pump costs around 780 € annually, whereas direct electric heating surpasses 2,400 €, and no electric radiator, regardless of its price, consumes less than another.

The price of kWh: the figure everyone examines

Here are the rates for 2026, listed in euro cents per kilowatt-hour. These figures often fuel standard comparisons.

Energy sourcePrice per kWhComments
Wood chips4.20 to 6.30 c€Reservable only with silo installations
Logs7.00 c€The cheapest fuel available to all
Bulk pellets7.1 to 7.4 c€Delivered by blower truck, silo required
Bagged pellets7.5 to 8.0 c€The most common format among individuals
Heat network7.72 c€Only available in certain municipalities
Natural gas12.76 c€Excluding subscription
Home heating oil18.51 c€New installations prohibited since 2022
Electricity, base rate20.01 c€Regulated rate, option base 6 kVA
Propane in tankUp to 15.72 c€Off-grid solution

At first glance, this ranking seems straightforward: wood dominates, while electricity costs three times more than pellets. However, this table does not reflect the actual amount you pay to heat your living room; it simply indicates what you pay for raw energy, which isn’t the same thing.

The real calculation: the cost of useful kWh

Between the energy purchased and the heat that reaches the room lies a piece of equipment with a specific efficiency. A condensing boiler returns about 90% of what it consumes, while a pellet stove offers around 85%. In contrast, a heat pump can produce 3 to 4 kWh of heat for every 1 kWh of electricity it consumes, achieving an efficiency exceeding 300%, because it doesn’t create heat; it transfers it.

This radically alters the landscape. For a demand of 12,000 kWh of heat per year, typical of a well-insulated 100 m² house:

SystemEfficiencyCost of useful kWhAnnual bill
Air-water heat pumpCOP 3~0.065 €~780 €
Pellet stove or boiler85 %~0.082 €~990 €
Condensing gas boiler90 %~0.116 €~1,390 €
Oil boiler85 %~0.129 €~1,550 €
Propane boiler90 %~0.178 €~2,130 €
Electric radiators100 %~0.200 €~2,401 €

The difference between the top and bottom of the table reaches 1,620 € annually. Over ten years, that’s more than 16,000 €, equivalent to the installation cost of an air-water heat pump after deducting subsidies.

Read also:  Excess nitrogen and phosphorus from the Danube choke Black Sea ecosystems

Two remarks are almost always missing from such comparisons. First, the declared COP of a heat pump is measured under standardized conditions; in extreme cold, the efficiency drops, and an improperly sized heat pump can switch to its auxiliary electric resistance, which raises costs to levels similar to direct electric heating. Secondly, pellets experienced a price surge in 2022 that doubled their cost within months. A fuel that is affordable today may not remain so over the next decade.

Installation costs: the other half of the equation

EquipmentInstallationAnnual billCost over 10 years
Electric radiators (6 units)600 to 4,000 €~2,400 €~24,600 to 28,000 €
Condensing gas boiler3,000 to 7,000 €~1,390 €~16,900 to 20,900 €
Pellet stove3,000 to 8,000 €~990 € as main source~12,900 to 17,900 €
Air-water heat pump10,000 to 16,000 €~780 €~17,800 to 23,800 €
Pellet boiler10,000 to 20,000 €~990 €~19,900 to 29,900 €

The rankings tighten significantly here, and this is where subsidies become crucial: a heat pump subsidized by 5,000 € surpasses a gas boiler over ten years. Without assistance and with an installation cost of 16,000 €, it still lags behind.

The pellet stove occupies a unique position. On paper, it offers the best investment-to-bill ratio, but it heats only a specific volume, not an entire house. In a partitioned or multi-story dwelling, additional heating is usually necessary, complicating the cost calculations.

Let’s address carbon footprints, as they play an increasingly significant role in decision-making and energy performance assessments. For 15,000 useful kWh, approximately 85 kg of CO₂ is produced with a heat pump, 325 kg with pellets, 1,766 kg with natural gas, and 2,181 kg with heating oil. The discrepancy between the first and last option represents a 25-fold difference.

The myth that costs the French the most

This section is the most useful in this report, and it can be summed up in a single physics sentence: all electric radiators have an efficiency close to 100%. A 40 € convection heater converts one kilowatt-hour of electricity into one kilowatt-hour of heat. A 1,200 € double-heart inertia radiator does exactly the same. It cannot perform better because energy is conserved; all electricity consumed turns into heat in the room.

The organization UFC-Que Choisir asserts that the marketing claim that an inertia radiator “continues to heat even when turned off” is a misleading sales tactic. It simply redistributes the heat it has already consumed, albeit with a delay.

Type of radiatorPriceConsumption at equal comfortWhat actually changes
Convector30 to 350 €IdenticalDry air, discomfort, rapid heating
Radiant panel40 to 800 €IdenticalImproved comfort, rapid heating, good compromise
Inertia70 to 1,100 €IdenticalGentle and stable heat, slow start
Double heart300 to 1,200 €IdenticalSpeed and comfort together, at a questionable price

So where are the savings in electric heating? Only in three areas: thermostat precision, hourly programming, and proper insulation. Replacing six convectors with six high-end inertia radiators costs between 1,500 and 6,000 € and will not reduce consumption. Investing the same amount in attic insulation, however, will.

Read also:  France plans stricter regulations on phosphate fertilizers due to cadmium risks

Scams to avoid before spending a euro

The energy-saving device resurfaces every autumn through unsolicited sales calls, promising a 20% reduction on your bill. Salespeople often have precise personal information, lending credibility to their claims. However, these devices do not reduce energy consumption in residential settings: meters measure active energy, and no device plugged into an outlet decreases that by one-fifth. The rule is simple: real savings can only be achieved by modifying either the equipment, the insulation, or the usage.

Energy renovation telemarketing follows the same cycle. Before signing anything, demand full identification of the company, proof of current RGE qualification needed for MaPrimeRénov, a detailed protocol, and a breakdown of costs both ex VAT and including VAT. No payment should be made before the work is completed, and a 14-day cooling-off period applies for contracts signed outside the establishment.

Ways to lower bills without renovations

Before changing systems, there is still some leeway as quantified by ADEME.

When pooled together, these actions can save around 20 to 25% on your bill. This may not seem dramatic individually, yet it is immediate and free.

Useful equipment includes a Tado° connected thermostat for a boiler or connected thermostatic heads to control central heating room by room -an inexpensive solution when you cannot alter the boiler, like in a co-owned property.

The thermostat decree: changes in late 2025

This may not be widely reported, but it is crucial. Decree No. 2023-444 of June 7, 2023, mandates the installation of a programmable thermostat in the heating systems of existing residential buildings by January 1, 2027. The Decree No. 2025-1343 of December 26, 2025, has postponed this deadline to January 1, 2030.

What remains in force is this: for new constructions with permits submitted from January 1, 2027, the obligation applies from that date. Exemptions exist if the installation is not technically or economically feasible, especially if the payback time exceeds ten years, substantiated by proof.

Read also:  France boosts forest protection with nine new or expanded biological reserves

The practical consequence is counterintuitive: the delay is not a reason to wait. A thermostat pays for itself within a single heating season; the obligation or absence thereof does not alter this calculation. Property owners bear installation costs, while tenants handle maintenance.

Available aids in 2026

MaPrimeRénov’ remains the primary initiative for changing heating systems. Here are the monetary amounts for individual installations:

EquipmentVery low incomeLow incomeIntermediate incomeHigh income
Air-water heat pump5,000 €4,000 €3,000 €Not eligible
Geothermal or solar thermal pump11,000 €9,000 €6,000 €Not eligible
Air-air heat pumpExcluded from isolated actions, eligible only in major renovations

Conditions to know before obtaining a quote: primary residence, at least fifteen years old, coefficient of performance of at least 3.4, minimum power of 3 kW, and installation by a certified RGE professional. Without RGE, no assistance.

Additional cumulative benefits can further ease the bill: energy savings certificates available to all households, a bonus for replacing an oil, gas, or coal boiler, zero-interest eco-loan up to 30,000 € over twenty years, and a 5.5% VAT rate on air-water and geothermal heat pumps. In major renovation projects, the CEE is integrated into the overall aid and should not be requested separately.

Which solution is right for your home

Your situationWhat makes senseWhat does not
Apartment in co-ownership with collective heatingConnected thermostatic heads, free actions, insulation of windowsAny change of generator, which falls under co-ownership
Apartment with individual electric heatingThermostat and programming, insulation, possibly a reversible air conditioning if permitted by the buildingReplacing convectors with high-end inertia: no consumption gains
House with recent gas boilerKeep it, maintain it, add a programmable thermostatReplace a condensing boiler less than ten years old
House with older oil or gas boilerAir-water heat pump with MaPrimeRénov’ and heating bonus: the best-subsidized optionStay with oil, as new installations have been banned since 2022
Poorly insulated house rated F or GInsulate first -attic, then walls. A heat pump in a thermal sieve can revert to its auxiliary resistanceChange the generator before improving the envelope
House with easy access to woodPellet or log stoves as the primary source for the living areaCount on it to heat a partitioned floor
Off-grid gas homeHeat pump or pelletsPropane, costing over 2,100 € annually for 12,000 kWh
TenantFree actions, thermostatic heads, door snakes, thick curtainsAny major investment that falls to the landlord

Frequently asked questions

What is the cheapest heating option in 2026?

The air-water heat pump, costing about 780 € annually for 12,000 kWh of heat, is cheaper than pellets, which cost around 990 €. This calculation accounts for equipment efficiencies: the heat pump produces 3 to 4 kWh of heat for each kWh of electricity consumed, offsetting a kWh price three times that of wood.

Does an inertia radiator consume less than a convector?

No. All electric radiators have an efficiency close to 100%: one kilowatt-hour consumed yields one kilowatt-hour of heat, regardless of the model. What varies is comfort, temperature stability, and thermostat precision. UFC-Que Choisir considers the claim of a radiator that “still heats when turned off” to be a misleading marketing argument.

How much does electric heating cost annually in France?

About 836 € for a heating season from October to March, based on an average consumption of 4,312 kWh at the regulated rate, which amounts to nearly 140 € monthly during that period. For a 100 m² house requiring 12,000 kWh of heat, the bill exceeds 2,400 € each year.

Will thermostats be mandatory in 2027?

Not for existing homes. Decree No. 2025-1343 has postponed the deadline from January 1, 2027, to January 1, 2030. The obligation still applies from January 1, 2027, for new constructions whose permits are submitted from that date.

How much can you save by lowering the heating by one degree?

Adequately, around 7% of consumption decreases per degree, according to ADEME. On a heating bill of 836 €, this represents nearly 60 € for just one degree drop. Reducing temperature from 21 to 19 °C in living spaces yields savings of approximately 120 € per season, without any investment.

What subsidies are available for installing a heat pump in 2026?

MaPrimeRénov’ provides between 3,000 and 5,000 € for an air-water heat pump and from 6,000 to 11,000 € for a geothermal heat pump, based on income, with higher income households no longer eligible for the isolated action. Additional financial assistance options include energy savings certificates, zero-interest eco-loans up to 30,000 €, and a reduced VAT of 5.5%. Installation by an RGE-certified professional is mandatory.

Do energy-saving devices work?

No. These devices, commonly sold through unsolicited phone calls with promises of 20% savings, do not reduce energy consumption in residential settings. The meter measures active energy, and no device plugged into an outlet can subtract that amount. The only effective strategies are related to equipment, insulation, and usage.

Verdict

Three decisions shape heating costs, and they don’t occur in the same sequence suggested by marketing calls.

The first is free: lowering the temperature by one degree, implementing a heating schedule, and ensuring radiators are cleared and bled. These adjustments can yield 20 to 25% savings on bills, realized immediately, with no quotes or work needed. The second requires an investment ranging from 150 to 250 €: a programmable or connected thermostat can result in savings of up to 15%, as indicated by ADEME, which is recouped in a single heating season. The postponement of the obligation to 2030 does not affect this calculation.

The third option is a more significant investment, and it warrants multiple quotes and patience. A replacement of an old oil or gas boiler with an air-water heat pump remains 2026’s best-subsidized action, with up to 5,000 € from MaPrimeRénov’ plus additional savings certificates. However, for a house rated F or G, the order should reverse: insulation comes first; otherwise, the heat pump may revert to its electric resistance in cold weather, costing as much as a convector.

Lastly, the easiest savings can be achieved, simply by not spending anything: do not replace six convectors with six inertia radiators in hopes of cutting down consumption. Physics dictates that this approach will yield no savings, with 1,500 to 6,000 € better invested in attic insulation instead.